skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

STEP-NC-based machining architecture applied to industrial robots

Toquica, Juan ; Zivanovic, Sasa ; Bonnard, Renan ; Rodriguez, Efrain ; Alvares, Alberto ; Ferreira, João

Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, Vol.41(8), pp.1-18 [Tạp chí có phản biện]

ISSN: 1678-5878 ; E-ISSN: 1806-3691 ; DOI: 10.1007/s40430-019-1811-y

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    STEP-NC-based machining architecture applied to industrial robots
  • Tác giả: Toquica, Juan ; Zivanovic, Sasa ; Bonnard, Renan ; Rodriguez, Efrain ; Alvares, Alberto ; Ferreira, João
  • Chủ đề: STEP-NC ; AP-238 ; LinuxCNC ; Industrial robots ; Machining
  • Là 1 phần của: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, Vol.41(8), pp.1-18
  • Mô tả: This paper presents a method for applying the ISO 10303-238 (AP-238) standard in robotic machining operations by using two industrial robots. The method encompasses programming, simulation and machining by industrial robots. Application and validation of robotized machining is performed using two industrial robots, and the following tools are used: (a) a commercial CAD/CAM software with a plug-in to generate STEP-NC files (AP-238); (b) simulation with a STEP-NC-compliant software using two virtual robot models, as well as the generation of G-code files through postprocessors; and (c) two industrial robots (ASEA IRB6-S2 and LOLA 50) using the LinuxCNC controller adapted to STEP-NC. Initially, a 3D part is designed using any CAD system, and it is sent through the Internet to a CAM specialist who uses a commercial software to generate a process plan to manufacture the part. Operators of the robots download the part and its process plan information in the STEP-NC format, simulate its machining through the working steps and then perform machining using the robots.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 1678-5878 ; E-ISSN: 1806-3691 ; DOI: 10.1007/s40430-019-1811-y

Đang tìm Cơ sở dữ liệu bên ngoài...