skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Effect of Silicon Concentration on the Dendrite Coherency Point in Al–Si Binary Alloys

Xu, Rongfu ; Zheng, Hongliang ; Guo, Fengxiang ; Zhang, Yong ; Ding, Supei ; Tian, Xuelei

Transactions of the Indian Institute of Metals, 2014, Vol.67(1), pp.95-100 [Tạp chí có phản biện]

ISSN: 0972-2815 ; E-ISSN: 0975-1645 ; DOI: 10.1007/s12666-013-0320-4

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Effect of Silicon Concentration on the Dendrite Coherency Point in Al–Si Binary Alloys
  • Tác giả: Xu, Rongfu ; Zheng, Hongliang ; Guo, Fengxiang ; Zhang, Yong ; Ding, Supei ; Tian, Xuelei
  • Chủ đề: Dendrite coherency point ; Hot tearing ; Thermal analysis ; Al–Si binary alloys ; Solid fraction
  • Là 1 phần của: Transactions of the Indian Institute of Metals, 2014, Vol.67(1), pp.95-100
  • Mô tả: Dendrite coherency is important to the formation of the solidification structure. The coherency point is a temperature at which the microstructure starts to bridge and develop some mechanical resistance. It is still too early in the solidification process for hot tearing to develop. Dendrite coherency point (DCP) characteristics in Al–Si binary alloys have been studied by double thermocouples method during solidification process. The results indicate that the DCP and solid fraction at DCP are decreased with an increase in silicon concentration. As for the unrefined Al–xSi (x = 1, 3, 5, 7 and 9 wt%) system alloys, the solid fraction at DCP varies from 0.14 to 0.38 and the corresponding dendrite coherency temperature varies from 598.6 to 653.8 °C. In addition, there is an approximate nonlinear relationship between DCP and silicon concentration. For the binary Al–Si hypoeutectic alloys, the change of DCP is not obvious by the grain refinement and modification treatment for the melt.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0972-2815 ; E-ISSN: 0975-1645 ; DOI: 10.1007/s12666-013-0320-4

Đang tìm Cơ sở dữ liệu bên ngoài...