skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg

Ahmadkhaniha, Donya ; Huang, Yi ; Jaskari, Matias ; Järvenpää, Antti ; Sohi, Mahmoud ; Zanella, Caterina ; Karjalainen, L. ; Langdon, Terence

Journal of Materials Science, 2018, Vol.53(24), pp.16585-16597 [Tạp chí có phản biện]

ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/s10853-018-2779-1

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg
  • Tác giả: Ahmadkhaniha, Donya ; Huang, Yi ; Jaskari, Matias ; Järvenpää, Antti ; Sohi, Mahmoud ; Zanella, Caterina ; Karjalainen, L. ; Langdon, Terence
  • Là 1 phần của: Journal of Materials Science, 2018, Vol.53(24), pp.16585-16597
  • Mô tả: High-pressure torsion (HPT) processing was applied to cast pure magnesium, and the effects of the deformation on the microstructure, hardness, tensile properties and corrosion resistance were evaluated. The microstructures of the processed samples were examined by electron backscatter diffraction, and the mechanical properties were determined by Vickers hardness and tensile testing. The corrosion resistance was studied using electrochemical impedance spectroscopy in a 3.5% NaCl solution. The results show that HPT processing effectively refines the grain size of Mg from millimeters in the cast structure to a few micrometers after processing and also creates a basal texture on the surface. It was found that one or five turns of HPT produced no significant difference in the grain size of the processed Mg and the hardness was a maximum after one turn due to recovery in some grains. Measurements showed that the yield strength of the cast Mg increased by about seven times whereas the corrosion resistance was not significantly affected by the HPT processing.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/s10853-018-2779-1

Đang tìm Cơ sở dữ liệu bên ngoài...