skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

On the solid/liquid interfacial energies of metals and alloys

Kaptay, George

Journal of Materials Science, 2018, Vol.53(5), pp.3767-3784 [Tạp chí có phản biện]

ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/s10853-017-1778-y

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    On the solid/liquid interfacial energies of metals and alloys
  • Tác giả: Kaptay, George
  • Chủ đề: Alloys – Analysis ; Solid Solutions – Analysis ; Specialty Metals Industry – Analysis
  • Là 1 phần của: Journal of Materials Science, 2018, Vol.53(5), pp.3767-3784
  • Mô tả: The solid/liquid interfacial energies of pure metals and metallic alloys are modelled in this paper. A simple model is offered for pure metals, showing that their solid/liquid interfacial energy (sigma) slightly increases with temperature. Sigma for metallic alloys is considered for the interface between solid and liquid solutions being in thermodynamic equilibrium, calculated by the CALPHAD method. The Butler equation is extended to find the equilibrium composition of the solid/liquid interfacial region and the solid/liquid interfacial energy at fixed temperatures. This method takes into account the segregation of low-interfacial energy components to the solid/liquid interfacial region. It is shown how the new method can be extended to multi-component alloys. The method is applied to calculate the solid/liquid interfacial energy of Al-rich solid solutions in equilibrium with eutectic liquid alloys of Al–Cu, Al–Ni, Al–Ag and Al–Ag–Cu systems. Good agreement was found with experimental values. For the Al–Ag–Cu system, the modelled value allows to select the more probable experimental value from the two contradicting experimental values published in the literature. The solid/liquid interfacial energy is calculated for the eutectic Ag–Cu system as function of liquidus composition (which determines both the equilibrium solidus composition and the equilibrium temperature). Finally it is claimed that using solely bulk thermodynamic data (melting enthalpy and molar volumes of pure components and molar excess Gibbs energies of equilibrium solid and liquid solutions) it is possible to provide meaningful values for the temperature and concentration dependence of solid/liquid interfacial energies of alloys. The method can be applied for simulation of solid/liquid phase transformation and also to solid/liquid equilibrium calculations of nano-alloys.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/s10853-017-1778-y

Đang tìm Cơ sở dữ liệu bên ngoài...