skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Acquiring reference parameters of masonry for the structural performance analysis of historical buildings

Kržan, Meta ; Gostič, Samo ; Cattari, Serena ; Bosiljkov, Vlatko

Bulletin of Earthquake Engineering, 2015, Vol.13(1), pp.203-236 [Tạp chí có phản biện]

ISSN: 1570-761X ; E-ISSN: 1573-1456 ; DOI: 10.1007/s10518-014-9686-x

Truy cập trực tuyến

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Acquiring reference parameters of masonry for the structural performance analysis of historical buildings
  • Tác giả: Kržan, Meta ; Gostič, Samo ; Cattari, Serena ; Bosiljkov, Vlatko
  • Chủ đề: Historical masonry ; Masonry classification ; Testing procedures ; Reference parameters ; Performance limits
  • Là 1 phần của: Bulletin of Earthquake Engineering, 2015, Vol.13(1), pp.203-236
  • Mô tả: The structural performance of historical masonry elements can be understood provided the following factors are known: geometry; the characteristics of its masonry texture and morphology, state of damage and decay, physical, chemical and mechanical characteristics of the components (units, infill, mortar); the characteristics of built masonry as a composite material. In order to quantify the mechanical properties of the masonry both laboratory and in-situ tests are required. However, in the case of cultural heritage assets, the setting up of an effective knowledge procedure is strictly related to the minimization of invasiveness on the structure, with the aim of its conservation, rather than the cost–benefit optimization: thus it is essential to have available reference parameters to be adopted for different masonry types. Within this context, this State-of-the-Art paper on this topic is organized with integrated outcomes from the test campaigns carried out through the PERPETUATE project, that are also briefly presented. Reference parameters for effective seismic assessment are provided both for brick and stone masonry together with their upper and lower bound values for both mechanical parameters and damage limits for which proper limit states (LS) may be associated. Apart from the LS for structural elements (SE), the relevant LS’s for artistic assets attached to the SE are also presented in this paper.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 1570-761X ; E-ISSN: 1573-1456 ; DOI: 10.1007/s10518-014-9686-x

Đang tìm Cơ sở dữ liệu bên ngoài...