skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill

Chatterjee, Partha ; Sen Gupta, S. ; Sen, Suchitra

Bulletin of Materials Science, 2001, Vol.24(2), pp.173-180 [Tạp chí có phản biện]

ISSN: 0250-4707 ; E-ISSN: 0973-7669 ; DOI: 10.1007/BF02710097

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill
  • Tác giả: Chatterjee, Partha ; Sen Gupta, S. ; Sen, Suchitra
  • Chủ đề: X-ray diffraction ; ball-milling ; plastic deformation ; microstrain
  • Là 1 phần của: Bulletin of Materials Science, 2001, Vol.24(2), pp.173-180
  • Mô tả: An X-ray powder profile analysis in vanadium pentoxide powder milled in a high energy vibrational ball-mill for different lengths of time (0–250 h), is presented. The strain and size induced broadening of the Bragg reflection for two different crystallographic directions ([001] and [100]) was determined by Warren-Averbach analysis using a pattern-decomposition method assuming a Pseudo-Voigt function. The deformation process caused a decrease in the crystallite size and a saturation of crystallite size of ∼ 10 nm was reached after severe milling. The initial stages of milling indicated a propensity of size-broadening due to fracture of the powder particles caused by repeated ball-to-powder impact whereas with increasing milling time microstrain broadening was predominant. WA analysis indicated significant plastic strain along with spatial confinement of the internal strain fields in the crystallite interfaces. Significant strain anisotropy was noticed in the different crystallographic directions. A near-isotropy in the crystallite size value was noticed for materials milled for 200 h and beyond. The column-length distribution function obtained from the size Fourier coefficients progressively narrowed down with the milling time.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0250-4707 ; E-ISSN: 0973-7669 ; DOI: 10.1007/BF02710097

Đang tìm Cơ sở dữ liệu bên ngoài...