skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Nitriding kinetics of Fe-Al-Mn-Cr-C alloys at 1000° C

Duh, Jenq-Gong ; Wang, Chaur-Jeng

Journal of Materials Science, 1990, Vol.25(5), pp.2615-2618 [Tạp chí có phản biện]

ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF00638067

Toàn văn không sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Nitriding kinetics of Fe-Al-Mn-Cr-C alloys at 1000° C
  • Tác giả: Duh, Jenq-Gong ; Wang, Chaur-Jeng
  • Chủ đề: Specialty Metals Industry -- Nutritional Aspects
  • Là 1 phần của: Journal of Materials Science, 1990, Vol.25(5), pp.2615-2618
  • Mô tả: A needle-like structure of AlN is observed in Fe-31 Mn-9Al-0.87C-xCr (x=0, 3 and 6) alloys at 1000° C in a nitrogen atmosphere. The reaction front of nitriding moves parabolically with time. The nitriding rate is evaluated on the basis of the penetration depth of the nitriding layer at various lengths of time, and is found to be increased with increasing chromium content in the alloy. A quasi-steady state diffusion model is employed to investigate the nitriding kinetics by nitrogen migration through the alloy matrix. The nitriding rate depends on the solubility of nitrogen as well as the diffusivity of nitrogen in the alloy system. It is argued that the solubility of nitrogen predominates the nitriding, and thus the growth of AlN prevails in the austenitic phase instead of ferrite, due to the higher nitrogen solubility in austenite. In addition, the chromium alloying into the Fe-Al-Mn system increases the lattice parameter, which leads to a higher solubility of nitrogen, and hence a higher nitriding rate is obtained.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF00638067

Đang tìm Cơ sở dữ liệu bên ngoài...