skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Microstructure and strength of Si-Ti-C-O, fibre-reinforced aluminium and aluminium alloys

Williams, T. ; Shindo, D. ; Aoyagi, E. ; Hirabayashi, M. ; Waku, Y. ; Suzuki, M.

Journal of Materials Science, 1991, Vol.26(17), pp.4697-4701 [Tạp chí có phản biện]

ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF00612408

Toàn văn không sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Microstructure and strength of Si-Ti-C-O, fibre-reinforced aluminium and aluminium alloys
  • Tác giả: Williams, T. ; Shindo, D. ; Aoyagi, E. ; Hirabayashi, M. ; Waku, Y. ; Suzuki, M.
  • Chủ đề: Squeeze Casting ; Inclusion Particle ; High Resolution Microscopy ; Japan Industrial Standard ; International SAMPE Symposium
  • Là 1 phần của: Journal of Materials Science, 1991, Vol.26(17), pp.4697-4701
  • Mô tả: Microstructures of Si-Ti-C-O fibre-reinforced aluminium and aluminium alloys were investigated by scanning electron microscopy, and both conventional and analytical transmission electron microscopy. In the latter samples, some inclusions were observed between the matrix and the fibres. From the electron diffraction, high resolution microscopy and compositional analysis by energy-dispersive X-ray, the inclusions were identified as the α-Al-Si-Fe phase. Since the longitudinal three-point bending strength decreases with the increase of iron content, it was concluded that the α-phase inclusions on the surface of the fibre contribute to the lower strength of the composites based on this alloy.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF00612408

Đang tìm Cơ sở dữ liệu bên ngoài...