skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

The effects of the mechanical-chemical stabilization process for municipal solid waste incinerator fly ash on the chemical reactions in cement paste

Chen, Cheng-Gang ; Sun, Chang-Jung ; Gau, Sue-Huai ; Wu, Ching-Wei ; Chen, Yu-Lun

Waste management (New York, N.Y.), April 2013, Vol.33(4), pp.858-65 [Tạp chí có phản biện]

E-ISSN: 1879-2456 ; PMID: 23375995 Version:1 ; DOI: 10.1016/j.wasman.2012.12.014

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    The effects of the mechanical-chemical stabilization process for municipal solid waste incinerator fly ash on the chemical reactions in cement paste
  • Tác giả: Chen, Cheng-Gang ; Sun, Chang-Jung ; Gau, Sue-Huai ; Wu, Ching-Wei ; Chen, Yu-Lun
  • Chủ đề: Construction Materials ; Incineration ; Coal Ash -- Chemistry
  • Là 1 phần của: Waste management (New York, N.Y.), April 2013, Vol.33(4), pp.858-65
  • Mô tả: A water extraction process can remove the soluble salts present in municipal solid waste incinerator (MSWI) fly ash, which will help to increase the stability of the synthetic materials produced from the MSWI fly ash. A milling process can be used to stabilize the heavy metals found in the extracted MSWI fly ash (EA) leading to the formation of a non-hazardous material. This milled extracted MSWI fly ash (MEA) was added to an ordinary Portland cement (OPC) paste to induce pozzolanic reactions. The experimental parameters included the milling time (96h), water to binder ratios (0.38, 0.45, and 0.55), and curing time (1, 3, 7 and 28 days). The analysis procedures included inductively coupled plasma atomic emission spectroscopy (ICP/AES), BET, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), and nuclear magnetic resonance (NMR) imaging. The results of the analyses indicate that the milling process helped to stabilize the heavy metals in the MEA, with an increase in the specific surface area of about 50times over that of OPC. The addition of the MEA to the OPC paste decreased the amount of Ca(OH)2 and led to the generation of calcium-silicate-hydrates (C-S-H) which in turned increased the amount of gel pores and middle sized pores in the cement. Furthermore, a comparison shows an increase in the early and later strength over that of OPC paste without the addition of the milled extracted ash. In other words, the milling process could stabilize the heavy metals in the MEA and had an activating effect on the MEA, allowing it to partly substitute OPC in OPC paste.
  • Ngôn ngữ: English
  • Số nhận dạng: E-ISSN: 1879-2456 ; PMID: 23375995 Version:1 ; DOI: 10.1016/j.wasman.2012.12.014

Đang tìm Cơ sở dữ liệu bên ngoài...