skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Fabrication of cast particle-reinforced metals via pressure infiltration.(Author abstract)

Klier, E. M. ; Mortensen, A. ; Cornie, J. A. ; Flemings, M. C.

Journal of Materials Science, May, 1991, Vol.26(10), p.2519 [Tạp chí có phản biện]

ISSN: 0022-2461

Toàn văn không sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Fabrication of cast particle-reinforced metals via pressure infiltration.(Author abstract)
  • Tác giả: Klier, E. M. ; Mortensen, A. ; Cornie, J. A. ; Flemings, M. C.
  • Chủ đề: Metal Castings Industry -- Production Processes
  • Là 1 phần của: Journal of Materials Science, May, 1991, Vol.26(10), p.2519
  • Mô tả: Byline: E. M. Klier (1), A. Mortensen (1), J. A. Cornie (1), M. C. Flemings (1) Abstract: A new casting process for fabrication of particle-reinforced metals is presented whereby a composite of particulate reinforcing phase in metal is first produced by pressure infiltration. This composite is then diluted in additional molten metal to obtain the desired reinforcement volume fraction and metal composition. This process produces a pore-free as-cast particulate metal-matrix composite. This process is demonstrated for fabrication of magnesium-matrix composites containing SiC reinforcements of average diameter 30, 10 and 3 Im. It is compared with the compocasting process, which was investigated as well for similar SiC particles in Mg-10 wt % Al, and resulted in unacceptable levels of porosity in the as-cast composite. Author Affiliation: Article History: Registration Date: 26/01/2005 Received Date: 16/01/1990 Accepted Date: 12/07/1990
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461

Đang tìm Cơ sở dữ liệu bên ngoài...