skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Thermal Properties of Lead-Acid Battery Plastic Lightweight Concrete

Duaa E. Aljubori ; Suhair K. Al-Hubboubi ; Abeer I. Alwared

Engineering Journal, 01 December 2018, Vol.24(12), pp.35-44 [Tạp chí có phản biện]

ISSN: 1726-4073 ; E-ISSN: 2520-3339

Toàn văn sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Thermal Properties of Lead-Acid Battery Plastic Lightweight Concrete
  • Tác giả: Duaa E. Aljubori ; Suhair K. Al-Hubboubi ; Abeer I. Alwared
  • Chủ đề: Lightweight Concrete; Acid-Lead Battery Plastic; Strength Properties; Thermal Conductivity; Wet Density
  • Là 1 phần của: Engineering Journal, 01 December 2018, Vol.24(12), pp.35-44
  • Mô tả: This study investigates the possibility of using waste plastic as one of the components of expired lead-acid batteries to produce lightweight concrete. Different percentages of lead-acid battery plastic were used in the production of lightweight concrete. The replacements were (70, 80 and 100%) by volume of the fine and coarse aggregate. Results demonstrated that a reduction of approximately 23.6% to 35% in the wet density was observed when replacement of 70% to 100% of the natural aggregate by lead-acid battery plastic. Also, the compressive strength decreased slightly with the increase in plastic content at different curing ages of 7, 28, 60, 90, 120 days. The lowest value of compressive strength was (20.7 MPa) for (waste plastic =100%) at (120) days test age. The results also revealed that the thermal conductivity decreased by the addition of waste plastic compared to plain concrete and this property is decreased due to an increase in waste proportion.
  • Ngôn ngữ: Arabic
  • Số nhận dạng: ISSN: 1726-4073 ; E-ISSN: 2520-3339

Đang tìm Cơ sở dữ liệu bên ngoài...