skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Casting particulate and fibrous metal-matrix composites by vacuum infiltration of a liquid metal under an inert gas pressure

Yang, Jingyu ; Chung, D.

Journal of Materials Science, 1989, Vol.24(10), pp.3605-3612 [Tạp chí có phản biện]

ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF02385746

Toàn văn không sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Casting particulate and fibrous metal-matrix composites by vacuum infiltration of a liquid metal under an inert gas pressure
  • Tác giả: Yang, Jingyu ; Chung, D.
  • Chủ đề: Composite Materials Industry
  • Là 1 phần của: Journal of Materials Science, 1989, Vol.24(10), pp.3605-3612
  • Mô tả: A new method of making metal-matrix composites is reported. This method combines the essentials of three liquid-phase fabrication methods: (i) vacuum infiltration, (ii) infiltration under an inert gas pressure, and (iii) squeeze casting. In this method, the particulate or fibrous preform is placed in a mould and the matrix alloy is placed above the preform. The matrix alloy is heated to the liquidus temperature together with the mould and the preform under vacuum. Then an inert gas like argon is compressed on to the top surface of the matrix-alloy melt, forcing the melt to infiltrate the preform. The pressure is 1000 to 2500 psi. As the melt is just at liquidus temperature, it is much lower than that used in squeeze casting. Moreover, the pressure is an order of magnitude lower than that used in squeeze casting. The low temperature lessens the interfacial reaction between the matrix and the filler, while the low pressure essentially eliminates preform compression. This method has been successfully used to fabricate aluminium-matrix composites reinforced by short ceramic fibres, continuous ceramic fibres, SiC particles, Al 2 O 3 particles, graphite flakes and SiC whiskers.
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 0022-2461 ; E-ISSN: 1573-4803 ; DOI: 10.1007/BF02385746

Đang tìm Cơ sở dữ liệu bên ngoài...