skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Chỉ mục

Unified user interface for multiple independently developed instruments

Marks, T.

Presented at the 45th Annual Institute of Nuclear Materials Management Annual Meeting, 2004

TRN: US1003695

Toàn văn không sẵn có

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Unified user interface for multiple independently developed instruments
  • Tác giả: Marks, T.
  • Chủ đề: Nuclear Fuel Cycle And Fuel Materialsarchitecture ; Calibration ; Design ; Implementation ; Lanl ; Monitoring ; Nuclear Materials Management ; Ornl
  • Là 1 phần của: Presented at the 45th Annual Institute of Nuclear Materials Management Annual Meeting, 2004
  • Mô tả: Los Alamos National Laboratory (LANL) and Oak Ridge National Laboratory (ORNL) have collaborated to develop an integrated second-generation non-destructive assay (NDA) instrument for continuous, unattended measurement of UF₆ gas flowing in process pipes of a blend-down facility. LANL was responsible for measuring the U-235 enrichment, and ORNL was responsible for measuring the fissile mass flow. The first generation of these instruments utilized completely independent hardware and software systems with separate and disparate user interfaces. For the second-generation system, a very high priority was placed on having a unified graphical user interface (GUI). Having a unified GUI facilitates the infrequent and short-duration inspector visits dictated by the host facility. This presentation describes the design and implementation of a software architecture that facilitates the development of a fully-unified GUI while preserving the advantages of independent instrument development. The unified GUI allows the user to perform all functions including setup, calibration, reporting and diagnostics on either instrument from either computer. The largely-independent development described herein accommodated well the challenges presented by: (1) having a tight schedule, (2) having the expertise for each of the two instruments residing at separate locations, and (3) needing to thoroughly test each subsystem before integration and yet assure proper operation of the integrated system with minimal time and effort at the end of the project. Item three can be especially important if there is insufficient NDA hardware to mock up the whole system at each location. The software architecture described here could be used for remote monitoring and control and could easily be expanded to integrate more than the two systems described here. Conference.
  • Nơi xuất bản: Los Alamos National Laboratory
  • Năm xuất bản: 2004
  • Ngôn ngữ: English
  • Số nhận dạng: TRN: US1003695

Đang tìm Cơ sở dữ liệu bên ngoài...